FakeAnim – add your video at the console to download ” FreeBoot “
With the release of the new Dashlaunch 3.03 for all owners FreeBoot consoles have an excellent ability to set your video to WMV 9 format at the first start up the console zakruzki any dashboards. those.instead of a white background with stripes and ball Xbox can set absolutely any of your video format WMV 9. Of course, downloading video takes time, ie, console launch will be delayed a little, it is directly dependent on the length of the video clips, so do not put a load on film)) at the launch of Glitch-a add clips absolutely no effect. You will also need to adjust the start-up roller under your system and a TV, choose the appropriate GPU launch delay, that you specified animation is not circumcised first. But as practice shows, simply repeat what is shown in the video tutorial below
1. Copy over all files to the archive on the hard drive or a USB flash drive of your Xbox 360
2. Edit launch.ini parameter file stored in the root of the USB drive / hard disk by specifying the parameter fakeanim way to your fakeamin.xex
3. Restart the console and make sure that the heating starts. Ignore the red screen in the early-Trial downloads
4. Once you are convinced about the program starts, only then remove bootanim.xex memory (internal Flash memory of the console) using FSD3 Explorer or FTP connection
5. Restart the console, and pay attention to the duration of the display screen red
6. Calibrate start editing fakeanim.ini file and changing the delay setting, check the console launch, adjusting GPU initialization time
7. When calibration is complete, edit fakeanim.ini setting the calibration file in the “0”
2. Edit launch.ini parameter file stored in the root of the USB drive / hard disk by specifying the parameter fakeanim way to your fakeamin.xex
3. Restart the console and make sure that the heating starts. Ignore the red screen in the early-Trial downloads
4. Once you are convinced about the program starts, only then remove bootanim.xex memory (internal Flash memory of the console) using FSD3 Explorer or FTP connection
5. Restart the console, and pay attention to the duration of the display screen red
6. Calibrate start editing fakeanim.ini file and changing the delay setting, check the console launch, adjusting GPU initialization time
7. When calibration is complete, edit fakeanim.ini setting the calibration file in the “0”
The essence of the calibration management GPU launch delay. Those. changing the delay parameter you achieve the minimum length of time the red display and the fullest of your video display. The – a number from 0 to 100 – each unit is 250 ms delay. Those. zaderka parameter 10 = 2.5 seconds.Verification should be carried out on a cold startup console.
it is recommended to start with a value of 5 for the Slim consoles
For Phat consoles with 13 values.
Setting delay – delay time
Parameter calibration – if set to 1 – calibrated displays a red screen when the console starts. If set to 0 – not proizodit calibration, has been completed, ie, the need for a red screen disappears, when you start the console displays a black background.
gamecrackster 